Urbana IL, USA___ 217 469 7663 ..M-F 9 - 5 CST
Garage Sale Pages:
Home
Lenco 4 Speed Transmission
Listing for a friend that is retiring from racing.
CS1, 16 spline output, 2.64 first gear, ford spline input, has neutral,
with Hurst shifters. Everything you see in the picture. Low laps.
$4500.00
Fuel Injection
Nitrous Oxide
Shop Services
Garage Sale
Contact Us
Click on photos for larger view
Memories By Yvonne
Holley Ash Tray
I quit smoking....I hope.
Custom made from a Holley carb adapter. $15.00
Custom made from a Holley carb adapter. $15.00
Click on photos for larger view
Kent Moore EVA J-38792
Electronic Vibration Analyzer
NEW, never used. This tool allows you to track down and pin point vibration problems in a vehicle or trailer. Engine, drive line,
drums, rotors wheels, etc. It can also be used to balance driveshafts in the car. It is truely amazing the number of problems you
can find and fix with this tool. This is the same tool used by GM, Ford and others. This item cost over $1200 new.
To really make this thing fly, software from Vibrate Software is recommended. Link below. While there, read up. There is a ton of information on this tool and how to use it as well as vibration problems in general.
To really make this thing fly, software from Vibrate Software is recommended. Link below. While there, read up. There is a ton of information on this tool and how to use it as well as vibration problems in general.
$525.00
20 Dollar Video Store
ea.
Auto Machine shop "How To" videos
The Following list of VHS videos were produced by the AERA (Automotive Engine Rebuilder Assoc.) These are made with real machinists in real shops. Excellent for any engine shop as a training aid or if you just want to know how things are done.
Crane Cams BBC Roller Lifters
Crane #13542 PRO series lifters
Excellent, low lap, no appreciable wear,
no flat spots, etc. Inspection guaranteed
$150.00
Excellent, low lap, no appreciable wear,
no flat spots, etc. Inspection guaranteed
$150.00
Crane BBC Guide Plates
New, for BBC # 13650.
for 3/8 pushrods. 8 pieces.. $40.00
for 3/8 pushrods. 8 pieces.. $40.00
Preparing cylinder heads for machining
Click on photos for larger view
Basic Machining of cylinder heads
Demagnitizer
Great for demagnitizing connecting rods or whatever. $40.00..10lbs
Aluminum OHC Head Rebuilding
Click on photos for larger view
Heavy Duty Head rebuilding
Cog Timing Belts
4 pieces, new. # 10 XL 075
$10.00 for all
$10.00 for all
Heavy Duty Rod Rebuilding
Dyno Engine Testing
Buy all 6 for $100.00
Garage Sale Pages:
Urbana IL, USA 217 469 7663 ..M-F 9 - 5 CST
All Text and images on this website are copyrighted by David Koehler 2000 and beyond
All sales are final. Items and services provided by Koehler Injection are intended for off road use only.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.