Urbana IL, USA___ 217 469 7663 ..M-F 9 - 5 CST
Click on photos for larger view
Garage Sale Page:
Urbana IL, USA 217 469 7663 ..M-F 9 - 5 CST
All Text and images on this website are copyrighted by David Koehler 2000 and beyond
All sales are final. Items and services provided by Koehler Injection are intended for off road use only.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.
Garage Sale Page:
3ML968 $150.
early Lifetime units w/o removable shoes
SL780
SL1020
SL1080
SL1140
$50 each
All the above non shoed units have lots of life left. Look it over after purchase . If not satisfied I will take back.
You pay the shipping both ways.
One owner.
Well cared for and tuned up regularly. It does have scratches,rub marks and paint wear.
If you are still resizing rods by hand, you have my sympathy.
This machine not only takes the physical strain out of this job but also speeds up the process and improves the final roundness and straightness as well.
3 phase but is currently being run with a phase convertor.
Manuals included
AG300 bore gage and light shown not included
Well cared for and tuned up regularly. It does have scratches,rub marks and paint wear.
If you are still resizing rods by hand, you have my sympathy.
This machine not only takes the physical strain out of this job but also speeds up the process and improves the final roundness and straightness as well.
3 phase but is currently being run with a phase convertor.
Manuals included
AG300 bore gage and light shown not included
Sunnen LBB 1810 Powerstroke Honing Machine
Sunnen S255 truing sleeve, NEW
$5.00
$5.00
Sunnen AN 85 Quick Coupler, new
$100.00
$100.00
Sunnen 1/2" Diamond sizing tool
$150.00
$150.00
Sunnen CF220A 2 inch setting standard, NEW
$40.00
$40.00
Misc. Sunnen Tooling
Machine only with lots of centering rings - $4600.00
Click on photos for a larger view
CR2700 $200.
CR2900 $250
CR3100 $250.
Sunnen CRF QR Holding fixture, NEW
For use with powerstroke honing machines. For holding on to small parts, new $500.
For use with powerstroke honing machines. For holding on to small parts, new $500.
CR1450 $200.
Sunnen Piston Fitting Mandrels
(with truing sleeves)
(with truing sleeves)
Sunnen Rod Resizing mandrels
Click on photos for a larger view
Might consider a wet bench machine in good working order as a trade in.
Truck Shipping: not available. You pick up or arrange for one of the equipment dealers to pick up and transport.
Sunnen AG 300
Perfect. With standard and optional gaging points, calibration ring and plate.
Perfect. With standard and optional gaging points, calibration ring and plate.
Points are the preferred carbide ball style.
Manual included.
Range: .720 - 3.375"
Bonus: Pin size setting fixture and Gage mounting bracket included. $1100.00
Sunnen TN111 rod straightness checker
- Stress-relieved casting
- Precision-ground checking surface
- Checks rods with or without pistons; and with or without caps
- Compensates for ring lands, cam-ground and tapered pistons
- Self aligning yoke clamps rod securely and square, including miter cut rod forgings
- Handles all rods, including bus and tractor rods, with crankshaft bearing from 1.750 to 3 in. diameter (44 - 76 mm), and up to 16.5 in. long (419 mm).
- White component was an upgrade piece in the 90s.
Sunnen CRG600 Hone Storage Bench
Front painted blue. Pick up only.
Front painted blue. Pick up only.
Tooling not included $500.00
$500.00
38 lbs
Sunnen BP10 Piston Press
10 ton, electric
10 ton, electric
pick up only $1300.00
Sunnen AN980 cylinder champhering tool
$40.00
$40.00
CR2500 $200.
Home
Fuel Injection
Nitrous Oxide
Shop Services
Garage Sale
Contact Us
Memories By Yvonne