Urbana IL, USA___ 217 469 7663 ..M-F 9 - 5 CST

Urbana IL, USA 217 469 7663 ..M-F 9 - 5 CST

All Text and images on this website are copyrighted by David Koehler 2000 and beyond

All sales are final. Items and services provided by Koehler Injection are intended for off road use only.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.

Div. of Koehler Injection

All components Made in America !

• Nitrous Master Jets & nozzles,
•  Combo-Flo Air operated solenoids
• Stainless tubing,,,,,,Billet line nuts
• Solenoid inlet fittings
• 3 Horsepower levels  
• Precision anal retentive Plumbing 
• Actuator, fittings and tubing to finish the Airnoid version included 
• Purge included

Add Ons

V8 Wet Nitrous Systems

Bolt on system for injected tunnel rams utilizing an Edelbrock or Holley manifold

The "NitrousCharger" is a "dry" system that works by fattening (enriching) the Fuel injection and adding the extra nitrous to compensate, similar to adding a supercharger. In this case the bottle is the air supply (supercharger).

This is offered as a "bolt on" system for the Edelbrock or Holley Chevy manifolds.
For other brands of engines & manifolds we will need your manifold to implement the NitrousCharger.

There is one nozzle per cylinder so that cylinder balance tuning can be achieved.

The NitrousCharger is much simpler and easier to work with than an electric solenoid wet system. Electrical supply: 9 volt battery (0.6 amp draw).
(You can still hook up to your normal battery if desired)

For Alcohol Mechanical Fuel Injection

TM

Part#
871SB1...SB chevy w Edelbrock Manifold

871SB2...SB Chevy w Holley Manifold

871BB1...BB w Edelbrock Manifold

871BB2...BB w Holley Manifold

Max supported HP

Price
$1495.00

800 HP

Airnoid info

• Jetting supplied to feed these HP levels: 150, 250, 350
• Other levels (jets) may be purchased separately.
• Tubing, fittings & actuator necessary for co2 activation.
• Purge included
• Tuning assistance included

Featuring Combo-Flo Airnoid

2 week delivery time

See the above nozzle system add on list for these items
Extra Nitrous Master Jets
15 lb bottle.
Steel Bottle Brackets
Nitrous feed line
Co2 10 oz bottle
Co2 regulator

(co2 operated)

Nitrous Charger Add Ons

info

Featuring Combo-Flo Airnoids

Choose

Koehler plumbed system shown w electric solenoids

V8 Airnoid Nozzle Wet System

$1995.00

4040....Y Fitting & hoses
         connect main n2o line to Airnoids.............$87.95

4006....Bottle nut...-6 stainless........................$14.95

4017.....Steel bottle brackets...........................$49.95

4030....Bottle psi gauge...................................$24.95

1008....Koehler Fuel Control..........................$164.95

NMcd...Nitrous Master software CD................

4041....hose kit to connect fuel control
to Airnoids..........................................$43.95

Extra Nitrous Master Jets..............................$5.00 ea

Other manifolds and engine brands:
We will need your manifold to implement the NitrousCharger.

Not included: Anything shown in the "add on" list above.

Not included: Anything shown on the "add on" list below.

20.......10 oz Co2 bottle..................................$84.95

30.......Dual gage Co2 regulator.......................$84.95

50.......Tube mount bottle clamp......................$42.95

-> NitrousCharger dry system for Alcohol Fuel Injection further down

4015....15 lb Bottle w SHF valve, gauge..........$315.95

Wet

For EFI, etc

V8 Airnoid Nozzle Dry System

$1495.00

Dry

Main Nitrous Services Page

Using your manifold

Weld/install nozzle bungs... add $150.00
Remove Indy Cyl Heads EFI bungs......$150.00

if needed

Pricing