Nitrous Oxide Injection scale,Tools

Urbana IL, USA___ 217 469 7663 ..M-F 9 - 5 CST

Urbana IL, USA 217 469 7663 ..M-F 9 - 5 CST

All Text and images on this website are copyrighted by David Koehler 2000 and beyond

All sales are final. Items and services provided by Koehler Injection are intended for off road use only.
No responsibility whatsoever will be accepted by Koehler Injection for any damage, injury or loss resulting from their use.

Nitrous Master Products

Div. of Koehler Injection

Nitrous Tools

Fuel Hydrometer

Do you know what your fuel is doing today?
19102 will cover all but the very lightest race gas. Will also handle methanol and ethanol.

19102... .700-.810 specific gravity..... .001 increments....24.95

19109....Beaker.......................................................................19.95

19101... .650 -1.00 specific gravity.... .005 increments....24.95

1/16 npt Tap

#4200.. $13.95

Pro Tubing Bender

3/16 tube by 7/16 bend radius

# 4203....$89.95

Nitrous Master Software

The best nitrous tool you will own.

Nitrous PRO Scale

Click here for more information and purchase.

Digital gauge

Nitrous Jet Vault

Open Flow Test Kit

Nitrous Filling Station

Scale, air regulator sold seperately....Bottles not included

Solenoid Wrench

Click here for more information

Click here for more information and purchasing

# 1010....$224.95

# 10150....$129.95

For testing purposes only.
Not to be permanent mounted.
0-100, reads in tenths

For Nitrous Master, NOS, Speedtech, Edelbrock, Cold Fusion

# NMJV1....$54.95

# 4202....$9.95

Works on most purge and conventional size solenoids to remove the coil and replace the piston.

The Refill Station comes complete with all the plumbing, hoses, gauge, valve, fittings, and bottle stand necessary to transfill nitrous from a mother cylinder to the receiving bottle instantly. It runs off your shop’s compressed air and requires no electrical hook-up.

# 4206 ..........Filling Station ....$934.95

Refill Station will require three to four items not included in the kit:
1. A compressed air supply (80-100 PSI)
2. Mother bottle (through local gas supplier)
3. Scale (as bottles are filled by weight)
4. A water separator/filter (this will help pump service life)

1. For maximum pump life, driving air supply should
contain a water separator and be filtered to 10 micron.
2. Loose connections will result in high pressure leaks
and can cause serious injury or death due to displacing
oxygen in room.
3. Do not exceed 100 psi driving air pressure. Pressures
in excess of 100 psi can cause equipment damage and
serious injury or death in the event of an explosion.

Warning

For replacement solenoid pistons click here